Spare part selection in pneumatic systems is not just about maintenance; it is a strategic parameter for operational continuity, MTBF, and total cost of ownership (TCO).
Using non-OEM or uncertified parts may cause:
Unplanned downtime
Energy inefficiency
Internal leakage and performance loss
Coil burnout and control failure
Safety risks
OEM-validated original spare parts provide:
Guaranteed system compatibility
Optimized energy consumption
Extended service life
Longer maintenance intervals
| Category | Technical Features | Application |
|---|---|---|
| Coil | AC/DC voltage options, ED 100% duty cycle | Solenoid valve systems |
| Pilot Valve | Fast response time, low ΔP | Directional control valves |
| Junction Box | IP65–IP67 protection | Industrial automation |
| Seal Kit | NBR, FKM, PTFE elastomers | Cylinder & valve maintenance |
| Maintenance Kits | Complete elastomer + filter set | Periodic maintenance |
| Parameter | Value / Range |
|---|---|
| Coil Voltage | 12V DC, 24V DC, 110–230V AC |
| Duty Cycle | ED 100% (Continuous Operation) |
| Protection Class | IP65 – IP67 |
| Ambient Temperature | -20°C / +70°C |
| Response Time | 20–80 ms |
| Filtration Target | ISO 4406 ≤ 18/16/13 |
| Certification | CE, ISO 9001 |
| Elastomer Options | NBR, FKM, PTFE |
Incorrectly referenced parts may cause:
Seal failure
Coil overheating
Increased ΔP
Higher energy consumption
OEM code validation ensures full system compatibility.
Wrong voltage selection may cause:
Weak magnetic field
Coil insulation damage
Thermal runaway risk
Continuous operation lines require ED 100%.
Filtration below ISO 4406 standard may cause:
Spool wear
Increased internal leakage
Pressure loss
Energy inefficiency
Correct spare part selection can improve system efficiency by 3–8%.
| Error | Result | Risk Level |
|---|---|---|
| Non-OEM part | Incompatibility + failure | High |
| Wrong coil voltage | Coil burnout | High |
| Poor filtration | Internal leakage + performance loss | Medium |
| Uncertified product | Safety risk | Critical |
Using original spare parts results in:
Lower maintenance frequency
Longer MTBF
Reduced energy consumption
Less unplanned downtime
Outcome: Lower total cost of ownership
Yeşil Grup Enerji supplies Parker pneumatic spare parts through its global sourcing network:
Europe: Germany, France, Italy, Poland, UK
Middle East: Turkey, Saudi Arabia, UAE, Qatar
CIS & Central Asia: Russia, Azerbaijan, Kazakhstan
Africa: Egypt, Nigeria, South Africa
Americas & Asia: USA, Brazil, China, India
Application Areas: Factory automation, CNC lines, power plants, mobile machinery.
Part code (coil, pilot valve, junction box, etc.)
Coil voltage (DC/AC)
Duty cycle requirement
Certification need (CE, ISO)
Environmental conditions (temperature, humidity)
Filtration level
Operating pressure
Complete technical data → Faster and more accurate quotation.
Why is using original spare parts critical? For compatibility, safety, and long service life.
What happens if non-OEM parts are used? Incompatibility, coil burnout, and system downtime risks increase.
Which materials should be chosen for seal kits? NBR → standard diesel, FKM → high temperature, PTFE → chemical resistance.
Which information speeds up the RFQ process? Part code, voltage, duty cycle, and certification details.
Parker pneumatic spare part solutions:
OEM validated
CE and ISO 9001 compliant
Improve energy efficiency
Extend system life
Reduce maintenance costs
Correct spare part selection ensures: ✔ Higher system safety ✔ Lower maintenance costs ✔ Longer service life ✔ Reduced energy consumption
For your project:
Part code validation
Voltage and duty cycle analysis
Certification compliance check
Filtration evaluation
Lifecycle cost analysis
📞 +90 505 696 61 00
🌐 www.yesilgrupenerji.com